750ml B3 PU Foam Spray / Spray Insulation Foam Can One-component
Aristo One-Component Construction PU Foam cures when moisture in
the air reacts with the chemistry of the foam, it can be used to
economically insulate and fill of large seams, joints and cracks
against heat loss, cold, draught, noise and moisture, adhere to all
building materials except polyurethane foil, silicone and Teflon.
Door and window insulation: seal, fill, fix and adhere the gap
between doors, windows and walls.
Advertisement model: make model and sand plate, repair show board.
Sound insulation and absorption: insulate and absorb sound as a
sealant in speech room and broadcast studio.
Gardening: make ikebana and gardening simple and beautiful.
Daily Maintenance: repair the hole, gap, brick and floor.
Resisting water and fixing leak: mend the hole of water pipe and
Packing and transportation: pack valuable and fragile goods easily
and quickly, resist shock and press.
Product is flammable during dispensing. Surfaces should be free of
oil, dust and grease, wear eye protection and gloves.
To assemble straw onto trigger, screw trigger assembly onto the
valve of the can. On initial use shake can vigorously for one
minutes and activate trigger in upside down position until foaming
Fill cavity 1/2 full, foam expands to fill area. Do not apply into
spaces with inadequate moisture and humidity.
Clean wet foam immediately from valve stem, unscrewed trigger, skin
and clothing with acetone. Store can in upright position. Bonds
quickly to skin, apply petroleum jelly, leave on 1 hour and wash.
Repeat process until foam is removed. Do not attempt to remove
dried foam with solvents.
Dried foam can be painted, sanded, plastered, grouted or caulked.
Paint applications exposed to sunlight.
Fills Cracks & Holes
Seals & Insulates
Black Insect Pathways